此页面上的内容需要较新版本的 Adobe Flash Player。

获取 Adobe Flash Player

Name:Automatic PC Bottle Blowing Machine
Product Details
GRA-250PC 5G PC Bottle  Blow Blowing Machine
Item:GRA-250PC(60-80BPH),60-80BPH
Suitable bottle: 4 gallon/5 gallon/6gallon water bottle with handle of PC Material.


Item Description Technical Unit
1 PC Hollow blow molding machine GRA-250PC 60-80BPH 1set
2 Under Blowing Device 1set  
3 Thickness control system MOOOG30,Japan 1set
4 Cutting mouth machine 1.5KW 1set
 5 Air compressor 2.0/10 1set
 6 Hopper dryer 400kg 20KW 1unit
 7 Auto loader 400kgs/H 3KW 1unit
8 Mold Temperature controller (oil type) 9KW 1unit
 9 Blow mould with handle (4/5/6 gallon) PC Bottle 3sets

Parameters:
Specification Unit GRA-90PC
Material   PC
Max.container  L 25
Number of die set 1
Capacity: pcs/hr 500
Machine Dimension m 6.5×2.4×4.7
Total weight ton 12
Accumulator head     DHB-82PC
Number of die heating zone 4
Power of die heating KW 8
Max die-pin diameter mm 150
Accumulator capacity L 1.8
General dimension m 1.2×0.5×0.42
Clamping Unit   DHB-82PC
Clamping force KN 220
platen opening stroke mm 330-780
platen size mm 740×630
Max mould size mm 550×660
Mould thickness mm 350-420
Extruder Unit   DHB-82PC
Screw diameter mm 82
Screw L/D ratio L/D 38:1
Extruding Volume Kg/hr 150
Number of heating zone zone 8
Extruder heating power KW 20
Extruder driving power KW 34
Oil pump drive power KW 45
Fan power for screw KW 0.9
Total power KW 90
Air pressure Mpa 1.2
Air consumption m3/min 1.0
Average energy consumption KW 42

Machine Component Details:
Name Specification Standard Remark
Extrusion device(main extrusion) Mail screw specification 82mm Exhaust PC screw
Screw L/D Ration 38:1  
Max extrusion capacity 140KG/Hr  
Extruder Driving Oil hydraulic motor Low speed high torque hydraulic motors (UK Flagstaff)
 Before/after adjustment Available
UP/Dow Adjustment Available Oil Hydraulic motor and worm gear drive chain
Temperature  control segments 7 Mitsubishi dedicated temperature control module, With extra temperature controller
Cooling fan 4  
Cooling device Available By cooling water
Clamping Mold Device Structure Dual bidirectional synchronization center clamping lever clamping force
Mold dimension 550×650mm
Mold open stroke 350~780mm
Clamping force 215KN
Open/clamping mold stroke control Sensor swith+touch senser
Photoelectric switch protection FOTEK 6 segments photo switch safety switch
Mold die device Die Central feeding material
Mouth size 80~120mm
Thickness adjustment device Available
Injection stroke control Accumulator electronic ruler + limit switch
Temperature control segments 4segments
Under blowing device Stroke control Sensor switch
Blowing cooling system By water
Electrical control system Temperature Mitsubishi,Japan Upper and lower alarming, P.I.D control
Loading protection Available
Action control Mitsubishi PLC
Touch screen Human HITECH colorful,with alarming system
Timing setting Touch screen Pressure and timing setting on the screen, to finalize the management and operation monitoring.。
Oil pressure system Main motor 60 HP  
Main oil pump   DENISON,USA
Action control way Proportional Pressure Control Setting range(0-999)
Direction control   Japan/DAKIN/YUKEN oil direction pressure control
Max pressure 140 kg/cm2  
Air compressor Direction control   Taiwan/AIRTEC air pressure control
Max pressure 8kg/cm2 PU Pipes for all pipes
Other Information
 
Lubrication system   Mold base by manual(injection oil by manual)
Oil pressure cooling   General mechanical action circulating oil through the oil cooler for cooling effect
Mold cooling   Independent of chilled water, and 5 into five connectors for use (unilateral)
Bucket seats,die cooling   independent cooling water circuit to ensure the cooling effect
Dimension L*W*H 6100*2500*2500(mm)
Weight 12T  
在线客服